INFICON SKY CDGxxxD (Profibus) User Manual
Page 5
tira54e1-a (2009-01) CDGxxxD.cp
5
8
Sensor Analog Input Function Blocks
27
8.1
Sensor Analog Input Function Block (Instance 1, CDG)
27
8.1.1
Block Type ID (ID 16)
28
8.1.2
AlarmEnable (ID17)
28
8.1.3
WarningEnable (ID 18)
28
8.1.4
Process Value (ID 19)
28
8.1.5
Status (ID 20)
28
8.1.6
Data Type (ID 21)
28
8.1.7
Data Unit (ID 22)
29
8.1.8
Reading Valid (ID 23)
29
8.1.9
Full Scale (ID 24)
29
8.1.10
Offset-A Data Type (ID 25)
29
8.1.11
Offset-A (ID 26)
29
8.1.12
Alarm Trip Point High (ID 31)
29
8.1.13
Alarm Trip Point Low (ID 32)
29
8.1.14
Alarm Hysteresis (ID 33)
29
8.1.15
Warning Trip Point High (ID 35)
29
8.1.16
Warning Trip Point Low (ID 36)
30
8.1.17
Warning Hysteresis (ID 37)
30
8.1.18
Safe State (ID 39)
30
8.1.19
Safe Value (ID 40)
30
8.1.20
Overrange (ID 44)
30
8.1.21
Underrange (ID 45)
30
8.1.22
Analog Input Block Adjust Command (ID 15)
30
8.2
Sensor Analog Input Function Block (Instance 2, ATM)
31
8.2.1
Block Type ID (ID 16)
31
8.2.2
Process Value (ID 19)
31
8.2.3
Status (ID 20)
31
8.2.4
Data Type (ID 21)
32
8.2.5
Data Unit (ID 22)
32
8.2.6
Reading Valid (ID 23)
32
8.2.7
Full Scale (ID 24)
33
8.2.8
Safe State (ID 39)
33
8.2.9
Safe Value (ID 40)
34
8.2.10
Overrange (ID 44)
34
8.2.11
Underrange (ID 45)
35
8.2.12
Analog Input Block Adjust Command (ID 15)
35
9
OneOfN Analog Input Function Block
36
9.1
Information on the Individual Indices
36
9.1.1
Parameters 17…45
36
9.1.2
Channel Instance Selector (ID 46)
36
10
Discrete Output Function Block (Relay 1 and 2)
37
10.1
Information on the Individual Indices
37
10.1.1
Block Type ID (ID 16)
37
10.1.2
Setpoint Value Status (ID 19)
37
10.1.3
Status (ID 20)
37
10.2
Discrete Output Function Block behavior
38
10.2.1
Block State Command Mapping
38
11
Trip Point Function Block (Relay 1 and 2)
39
11.1
Trip Point Function Block behaviors
39
11.1.1
Setpoint function
39
11.1.2
Atmosphere detection
39
11.2
Trip Point Function Block (Relay 1 and Relay 2)
40
11.2.1
Block Type ID (ID 16)
40
11.2.2
Low Trip Point (ID 19)
40
11.2.3
Low Trip Enable (ID 20)
40
11.2.4
Status (ID 21)
40
11.2.5
Hysteresis (ID 24)
41
11.2.6
Analog Input Sensor Function Block Instance (ID 27)
41
11.2.7
Data Units (ID 28)
41
11.2.8
Data Type (ID 29)
41
11.2.9
Percentage of ATM (ID 201)
41
11.2.10
High Trip Point (ID 202)
41
11.2.11
High Trip Enable (ID 203)
41