INFICON SQC-310 Thin Film Deposition Controller - Manual (Page 75)

Chapter 5 Communications
5-7
Delete All Layers
Command: E
Description: Deletes all 250 layers! Most often used to clear the entire inreument in
preparation for downloading a new list.
Parameters: None
Get/Set Material Parameters
Command: F
Description: Gets/Sets the parameters of the 100 stored materials.
Parameters: 1. Material Name 3. Zfactor
2. Density
Example: To Get Material 1 name, send: F1? 1
The return string would be of the form: Aluminum
To Set the parameter you would send: F1 1,AnyName
Note: You can only get/set one material parameter at a time.
Get/Set Input Parameters
Command: G
Description: Gets/Sets the logical function of each of the 16 digital inputs.
Parameters: 1 Start Process 32 Soak Hold
2 Abort Process 33 Zero Thickness
3 Start Layer 34 Zero Time
4 Stop Layer 35 Out1 Pocket Ready
5 Start Next Layer 36 Out2 Pocket Ready
6 Force Final Thick 37 Out3 Pocket Ready
7-31 Start Process 1-25 38 Out4 Pocket Ready
39 Not Used
Example: To Get Input 1 and Input 2 functions, send: G? 1 2