INFICON SQC-310 Thin Film Deposition Controller - Manual (Page 62)

Chapter 3 Menus
3-24
3.10 Relay and Input Se tup
The Input and Relay SoftKeys of the System Parameters Menu allow you to map the
eight digital inputs and the eight digital outputs (16 of each if the option card is
installed).
The Relay screen has an additional Softkey that allows each relay to be toggled
manually. Relays are returned to their proper defined state on exit from the Relay
screen.
I/O M apping M enu
To
M ain
Prev
M enu
E dit
Process 1 -> Layer 1 -> Film 1
Param eter Value
Input 13
Input 12
Input 11
Input 10
Input 9
Input 7
Input 6
Input 5
Input 4
Input 3
Input 2
Input 1
N one
N one
N one
N one
N one
N one
N one
N one
N one
N one
N one
N one
To
Main Returns to the Main Menu.
Prev
Menu Returns to the System Parameters Menu.
Edit Selects the highlighted parameter for edit. SoftKey functions
change to:
Next: Store parameter and move to next for editing.
Cancel: Stop editing and undo changes to selected parameter.
Enter: Stop editing and save value for selected parameter.
Control Knob: Turn to adjust value. Push to store value and
move to next parameter.