INFICON LDS3000 Modular Leak Detector - Manual (Page 21)

Operation 21
6 Operation
You can use the following accessories in combination with the mass spectrometer
module:
• CU1000 (control unit)
• BM1000 (bus module)
• IO1000 (I/O module)
The following applies to the functions and settings described in this chapter:
6.1 Switching the unit on
1 Switch on the backing pump.
2 Establish the power supply to the mass spectrometer module.
 System starts up automatically.
6.2 Assigning the analog outputs of the I/O module
The analog outputs of the I/O module IO1000 can be assigned different
measurement displays via the control unit CU1000 or the I/O module IO1000.
► Assign the analog outputs of the I/O module as needed:
S ETTINGS > S ET UP > I NTERFACES > I/O MODULE > A NALOG OUTP . >
C ONFIG . A NALOG OUTPUTS 1/2
Accessories Information on Are described in
Control unit Menu Operating Manual Control Unit CU1000
Bus module Commands Interface Protocols LDS3000
I/O module
Commands Interface Protocols LDS3000
Digital input and
outputs, Analog
outputs
Installation manual I/O module IO1000
Danger to life and material damage due to unsuitable operating conditions
There is danger to life due to unsuitable operating conditions. The unit can become
damaged.
► Avoid changing the position of the unit in an abrupt manner.
► Avoid extreme external vibrations and impact.