EZWatch Pro 3.0 - Manual (Page 84)

84
XP software. Witness XP default is 1001.
Step 6. Now, choose an option from the “Play with” menu. “Live video” plays the camera
which is currently viewing, “Remote Playback” will allow you to play back video
clips that had been recorded on Local DVR Server, and “Remote download” will
allow you to download video clips that had been recorded on Local DVR Server
Step 7. Enter your “Username” and “Password”. The administrator of Local DVR Server
must create a specified user account in Local DVR Server before you connect.
Without the correct username and password, you cannot log in.
Step 8. Choose a “Wavelet” or “MPEG 4” as Compression method for transmitting video.
Step 9. Choose an “Image quality”. Like other quality selectors, choosing a higher quality
will give a better image, but also take up more space and take longer to transmit.
Step 10. Choose an “Image size”. Choosing a Full size will give a better image, but also
take up more space and take longer to transmit. Oppositely, choosing a Half size
will give a worse quality and faster transmission speed.
Step 11. Press the “Connect” button to complete the process. FreeView Pro will connect
you to the Local DVR Server.
Step 12. “Site book” allows you to set up site information if you have more than one Local
Video Server wants to connect. Click “Site book” in the bottom corner of window
(you can also use “Set up site book” on the bottom tool bar) and enter the same
information as you enter above, then click “Add” to save it. You can click the
“Select site” icon in the upper right and decide which site you want to connect with.
Step 13. Repeat step 1~11 you can also connect more than one Local DVR Server and choose
which one you want to Play with. (Live video, Remote Playback and Remote
download)
Step 14. Click
near the top enter of your FreeView Pro window to disconnect when
you finish communicating with the local site.
“Save Password”, “Reconnect”, “Record”, “Listen” and “Select cameras” are
options on the right side of the window.
Save Password if you want this user’s password to be saved. This means that later when you