EZWatch Pro 3.0 - Manual (Page 33)

33
Pop-up event notification Enable this function will pop-up the event table on the screen when
the device is triggered.
Fit video display to window will enlarge the space taken by the sixteen video display window.
But it will take a lot power of CPU; so it is not necessary please do not use this function.
Note: Please setup resolution at 800*600 for your PC monitor. It will let you get larger
image and do not enable the “Fit video display to window “ function.
Stop sound alarm when stop trigger Enable this function, the sound alarm will stop when
trigger stops.
Minimize window when start program To minimize the window when enable Witness XP
program.
Video file closed and renew when playback Enable this function, the video file will close
and renew a new one automatically when you click “ Playback “ icon. You can playback the
current video file without waiting till the file close. Enable this function, it will cause the
length of video file not same as your setting on some video files.
Exit option To select PC status after exiting Witness XP program. Press the arrow buttons
to switch among “Exit program”, “ Turn off “, “ Log off “or “ Restart “. For example:
Select “Turn off”, the Windows OS will automatically shutdown after exiting Witness XP
program.
Auto login Enable this function will automatically login by user name and password saved in
the system when you reboot.
z NC-320AM-I Module: This function will be available when you use the NC-320AM-I
NetCom Controller Board. The detail setting as below:
Com port selects which Com port of your PC will be used to communicate with the PTZ &
I/O Controller Board (NC-320AM-I). This NC-320AM-I device can control extra 16
Sensors in, 3 Relay out, P/T/Z cameras (must come with NC-080AZ) and Speed Dome
cameras at the same time. (Optional)
Note: The real connecting port of your PC must be same as your settings in the system.