Enerpac PL200-Series - Manual (Page 4)

4
3.0 PRODUCT DESCRIPTION
The Pow’R-LOCK ™ lifting jack provides continuous positive
locking of the load through all stages of lifting and lowering. No
operator intervention is required to activate or de-activate the
automatic locking system.
Two diff erent stroke lengths are available. Both models are
powered by an external compressed air system (user-supplied).
A convenient two-button pendant controls operation of the jack's
air motor and directional control valve.
Refer to Section 2.0 for specifi cations, dimensions and other
product data. See Figure 2 for a list of major features and
components.
4.0 CONFORMANCE TO NATIONAL AND
INTERNATIONAL STANDARDS.
Enerpac declares that this product has been tested and
conforms to applicable standards and is approved to
carry the CE mark. An EU Declaration of Conformity is
enclosed separately.
4
05
08
09
08
09
10
07
06
15
16
18
14
20
01 01
19
03
02
12B
12A
04
13
17
24
22
23
21
11
Figure 2, Major Features and Components, PL200 Series Models (PL20014-ASA shown, PL20025-ASA similar)
Key:
01. Lifting Eye
02. Anti-Rotation Tubes
03. Protective Bellows
04. Jack Base
05. Handle Lock Lever
06. Positioning Handle
07. Air Shut-off Valve
08. Rear Cover Supports
09. Detent Pin
10. Hydraulic Reservoir
11. Wheel and Hub
12A. Upper Handle (raised)
12B. Upper Handle (lowered)
13. Hose Storage Hooks
14. Pendant Hose
15. Pendant Control
16. Caster Wheel
17. Lower Handle
18. Rear Access Cover
19. Rubber Latch
20. Tire
21. Hydraulic Cylinder
22. Front Access Cover
23. Anti-Rotation Plate
24. Load Cap
See Fig. 3