Dakota Ultrasonics UMX-2 - Manual (Page 57)

Dakota Ultrasonics
53
the next in a time delayed sequence, and will display all the menu options in
a continuous loop.
2) When DIRECT is displayed, immediately press and release the button to
enter the sub menu options. Again, the options will begin scrolling in a
continuous loop (NORTH, SOUTH, EAST, WEST, Current Log Location).
3) When the desired direction is displayed, immediately press and release the
button to set the option in the UMX-2. For this example, SOUTH has been
selected as the increment direction.
Note: If the user wants to ‘fast’ increment through a variety of storage
locations, follow step 3 above, and continuously ‘press and release’ to move
through storage locations. Example: current grid cell location is A1, and user
needs to move to A5. Repeat a ‘press and release’ when SOUTH appears, five
times repetitively.
4) Press and hold the button to escape out of the sub menu options at any
time.
11.7 Storing a Measurement
Now that a grid or sequential log has been created and uploaded to the UMX-2, and
the user is familiar with moving around through the log file, it’s time to take and store
a measurement. The following procedures outline this process:
Storing Measurements