Dakota Ultrasonics UMX-2 - Manual (Page 10)

UMX-2 Underwater Material & Coating Thickness Gauge
6
2.4 Quick Start (Dual Element)
Procedure
1) Attached the transducer to the UMX-2.
2) Press and release the single button located on the end of the UMX-2. The
displays should illuminate, and led lights will begin flashing.
3) The smaller of the two displays will begin scrolling the current configuration
settings of the UMX-2, and an auto zero will be performed.
4) The UMX-2 is ready to begin making measurements.