Dakota Ultrasonics UMX-2 User Manual
Page 19
Dakota Ultrasonics
15
Top End Cap:
Transducer Connectors
The transducer connectors and single control button are located on the top end cap
of the UMX-2. The transducer connectors are a special underwater Lemo “00”.
Note: There is no polarity associated with connecting a dual element transducer. If
a single element membrane style is connected, the dongle ‘must’ be plugged into the
connector labeled in the diagram above , in order for the UMX-2 to ‘auto identify’ the
single element probe type.
Single Control Button
The special magnetic reed found on the top end cap, provides single button
operation. Using this button and 3 basic press sequence options, the user can power
the UMX-2 on/off, enter the menu options, and change settings.
Bottom Outside End Cap: