Dakota Ultrasonics UMX-2 - Manual (Page 38)

UMX-2 Underwater Material & Coating Thickness Gauge
34
3) When the desired gain setting is displayed, immediately press and release
the button to set the gain in the UMX-2. For this example, MED has been
selected.
4) Press and hold the button to escape out of the sub menu options at any
time.
8.3 Units (in/mm)
The UMX-2 can be set to either English or Metric units. The procedure below
outlines how to set the units in the UMX-2:
Setting Units
1) Press and hold the single UMX-2 button, located on the top end cap, until
the top level menu options begin scrolling on the alpha display. Once this
occurs, the button can now be released. The menu options will scroll one to
the next in a time delayed sequence, and will display all the menu options in
a continuous loop.
2) When UNITS is displayed, immediately press and release the button to
enter the sub menu options. Again, the options will begin scrolling in a
continuous loop (IN, MM).