Dakota Ultrasonics UMX-2 - Manual (Page 18)

UMX-2 Underwater Material & Coating Thickness Gauge
14
•
E-E-E (Triple Echo) – Special multiple echo mode used only with our single
element membrane transducers.
UMX-2
LT ON
LT OFF
LTAUTO
MEMOFF
UPGRAD
UMX-2: This is a general utility menu for miscellaneous features and functions.
The following is a brief explanation of each sub menu item. Refer to page 32 for
further information on upgrading the UMX-2:
•
LT ON – Enables all the LED’s and display back lights.
•
LT OFF – Disables all the LED’s and display back lights.
•
LTAUTO – Powers all the LED’s and display back lights ‘on’ only when an
echo is detected (measurement). Refer to page 35 for further info.
•
MEMOFF/ON - Toggles the data storage facility On or Off. Refer to page
51 for further info.
•
UPGRAD – Feature to upgrade the firmware in the UMX-2 to the latest
version. Refer to page 65 for further info.
4.2 Top & Bottom End Caps
Top End Cap Bottom End Cap
The top & bottom inside end caps are where all connections are made to the UMX-2.
The bottom outside end cap also has a ‘zero reference standard’ attached. The
diagram above shows the layout and description of the connectors and zero
standard: