Dakota Ultrasonics UMX-2 User Manual
Page 53
Dakota Ultrasonics
49
3) Plug either the RS232 into a serial port, or USB connector into a USB port
on the PC.
4) Start the DakView3 utility software.
5) Click on SETTINGS, followed by clicking on COM PORT, to view the list of
available ports. The default setting for DakView3 is always AUTO. The
AUTO mode searches through all the possible com port options, and looks
for the port ‘automatically’. However, this can take some time. Therefore, if
the port is already known, manually select the port from the list.