Dakota Ultrasonics UMX-2 User Manual
Page 46
UMX-2 Underwater Material & Coating Thickness Gauge
42
10.4 Coating Calibration (PECT)
Known Velocity
If the coating velocity is known, and other than the factory set velocity of 0.0850
in/µsec (2159 m/sec), the user may wish to program the UMX-2. In order to set the
coating velocity, the DakView3 PC software must be used to create a setup, and
upload the setup into the UMX-2. Refer to page 58 regarding setups.