Atop Technology EH7510 User manual - Manual (Page 76)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
70
Table 2.45
Label Description Factory Default
ERPS VLAN Indicate current RAPS VLAN ID. None
Status Choose to enable ERPS with this particular VLAN. Disabled
West Port Choose the West Port of the RPL. Port9
East Port Choose the East Port of the RPL. Port10
RPL Owner Choose to enable Owner Function. Disabled
RPL Port Select the Owner Port. None
WTR Timer
Set the wait-to-restore (WTR) time of the ring in
minutes. Lower value has lower protection time.
Range from 0 to 12 minutes.
0
Holdoff Timer
Set the holdoff time of the ring.
Range from 0 to 10000 milliseconds.
0
Guard Timer
Set the guard time of the ring.
Range from 0 to 2000 milliseconds.
500
MEL
Set the maintenance entity group level (MEL) of the
ring.
Range from 0 to 7.
1
Propagate TC
Indicate the topology change propagation of the ring
ability.
Enabled
Fig. 2.59
Using the same example as above, configurations of two switches can be set up individually
as follows:
Table 2.46
EH7510 A EH7510 B
RAPS VLAN 8 RAPS VLAN 8
ERPS RAPS Enabled ERPS RAPS Enabled
West Port 1 West Port 1
East Port 2 East Port 2
RPL Owner Enabled RPL Owner Disabled
RPL Port West RPL Port none