Atop Technology EH7510 User manual - Manual (Page 103)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
97
3.3 General Command
The table below shows some useful commands that may be used anytime when using serial
console.
Table 3.1
Command Description
Enable Turn on privileged mode.
Disable Turn off privileged mode.
Configure Enter configuration mode.
? List all available options.
Exit Go back to previous menu.
Help Show any available helpful information.
Logout Log out of CLI
history <0~256>
Set the number of command to remember as history
Ex: history 5 : memorize 5 previous commends.
No history Disable command history
Show history List last history commands
Hostname Set switch name.
no hostname Reset the switch name to factory default setting.
[no] password <manager |
operator | all>
Set or remove username and password for manager or
operator. The manager username and password are also
used by the web user interface (web browser method of
configuration).
3.4 Command Example
Serial console method is available to make any configuration just like the web browser
method; these two methods have similar functionalities. The picture below shows all the
options on CLI. Two examples of making configurations, Administration and Spanning
Tree, are shown in following sub-sections; configurations are the same as explained in
Chapter 2 by using web browser, but the only difference is that we’re using a serial
console this time.