Atop Technology EH7510 User manual - Manual (Page 62)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
56
Fig. 2.45.b ＊Example＊
Fig. 2.45 and 2.45.b (example), display the current VLAN entry configuration; note that
below there are the corresponding VLAN entries.
Table 2.33
Label Description Factory Default
Name The VLAN ID name that can be assigned by the user. DEFAULT
VID
Configures the VLAN ID that will be added in static
VLAN table in switch.
The VLAN ID is in the range 2~4094.
Dependant
Member
Ports
Configures the ports to this specific VID. All Ports
Tagged Ports
Configures the ports that outgoing packet is tagged or
untagged.
Selected: The outgoing packet is tagged from this
port.
Unselected: The outgoing packet is untagged from
this port.
Dependant
*NOTE:
- Default settings only have VLAN ID on 1.To configure settings for VLAN ID other than 1,
users will have to assign ports to be in that VLAN group.
1. Go to VLAN Setting.
2. Fill in appropriate Name, VID, Member Ports, and Tagged Ports -> click on
Add/Modify.
3. Go to VLAN PVID.
4. Choose the same ports, and enter PVID (which is the same as VID).