Atop Technology EH7510 User manual - Manual (Page 102)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
96
Password: (enter password here)
Switch#
To enter the “configuration” mode, you need to be in the privileged mode, and then type in
the command “configure”:
Switch# configure
Switch(config)#
Below is a graphical view of the modes and its related privileges and screen prompt:
Users may enter
“?”
at any command mode and the CLI will return possible commands at
that point, along with some description of the keywords:
Switch(config)# ip ?
address Set IP address and subnet mask
default-gateway Set default gateway IP address
dns Set DNS IP address
Users may use the key to do keyword auto completion:
Switch(config)# syst <Tab>
Switch(config)# system
User Mode
Operator Privilege
Switch>
Privileged Mode
Manager Privilege
Switch#
Configuration Mode
Manager Privilege
Switch(config)#