Brady PAM 3000 - Manual (Page 60)

A-2 Printer-Applicator-System PAM 3000
Table A-2 Function keys in mode FAULT-IRRECOVERABLE
Errors During System Test
When switched on the printer automatically performs an internal self test.
If the test is completed succesfully, the PAM 3000 proceeds into the ONLINE mode.
If a hardware-fault occurs, the type of error is shown. In this case switch printer off and on
again.
If the fault remains again, call for Service.
CAN key Cancels the current print job.
Switch into ONLINE mode.
(LED ONL on, LED CAN off, LED PSE off)
If ONLINE mode cannot be entered, switch printer on and off again.
If the fault remains again, call for Service
Irrecoverable Errors
During printing, a fault has occured which cannot be cleared by the operator without cancelling
the current print run (e.g. hardware fault).
Display
The type of fault is shown in the display.
LED Display
LED CAN is flashing.
Function Keys