Brady PAM 3000 - Manual (Page 46)

Printer-Applicator-System PAM 3000 46
Standard Operation
NOTICE !
Before starting the first print job after switching on the printer it is necessary to
synchronize the label feed :
• Press the key to generate a synchronous running. Remove the processed labels
manually.
• Start the print job.
• Start the labelling process via PLC interface.
With every start signal received by the PLC interface the printer performs one application
cycle.
• Printhead is moved down.
• Label is printed.
• Printhead is moved up.
• Pad is moved to the peel-off table, vacuum is switched on.
• Label is peeled off by moving back the peel-off table and taken by the pad of the applicator
module.
• Pad is driven to move back into the upper end position.
• Peel-off table is driven to move back into the front position.
• Label is transported into the labelling position, vacuum is switched off.
• Label is placed onto the product.
• Pad is driven to return in its upper end position.
Now the printer-applicator-system is ready for the next cycle.
If an error occurs while the printer-applicator-system is operating, this is shown in the display
(for types of errors and how to treat them see appendix A).