Brady PAM 3000 - Manual (Page 33)

33 Printer-Applicator-System PAM 3000
Adjusting the Label Edge Sensor
Fig. 8d Adjustment of the label edge sensor
2
1
To accommodate a variety of print jobs, the position of the label edge sensor (1) can be
adjusted until it is at the proper sensing position. This setting is particularly useful when the
labels to be printed are narrow, perforated, bear reflective markings, or are labels which are
not square or rectangular in shape.
It is important to ensure that the sensor itself (the position of which is indicated by a green
mark in the sensor housing) is positioned so that the space between the labels can be
recognized by the photocell. In the case of labels which have an unconventional shape (ie.
not square or rectangular), the photo cell should be positioned at the leading edge of the label.
Adjustment of the sensor is performed by sliding the whole label edge sensor in and out.
It is recommended to use the pin-tool (2) included in the delivery contents for positioning the
sensor.