Brady PAM 3000 - Manual (Page 35)

35 Printer-Applicator-System PAM 3000
ONL key Switch into OFFLINE mode (LED ONL off)
FF key Provides label feed. The leading edge of the next label to be printed is in print
position.
CAN key Deletes data of the previous print job in internal memory.
Following that, "Pause reprint" is not available.
(see PSE key)
PSE key Repeats the print of the last label, after the previous print job has been
completed. (only if setup parameter 'Pause reprint' is on)
ONL key Pressing both keys together for at least 5 seconds will switch into the
+ SETUP mode.
CAN key (LED ONL off)
9 Control Panel
Fig. 9 Control Panel
The control panel of the PAM 3000 is fitted with 4 function keys with indicator LEDs, and a
2x16 character digital LCD display.
The control panel display constantly provides the operator with the actual information
concerning the current printer mode and label processing. The indicator LEDs support the
information shown in the display by indicating which keys have to be pressed (e.g. in the
event of a fault).
On the following pages, you will find descriptions of the key functions in the several system
modes of PAM 3000.
System Mode ONLINE