Brady PAM 3000 - Manual (Page 10)

Printer-Applicator-System PAM 3000 10
Peripheral ports : PLC-interface for the control of the labelling process
Interface for connecting the scanner
Interface for connecting the warning sensor label end
Interface for connecting the warning sensor ribbon end
Interface for connecting the warning light
Test feature : System test when switching on
Material recognition : Gap sensor (See-trough), adjustable from 3 until 48 mm in the width
Control features : Print stop and error message at the LCD display at
- Paper out
- Ribbon out
- Transport system open
- Applicator errors
Control panel : 4 Function keys with LED display
Backlit LCD with 2 lines of text, 16 characters per line
LCD can be set to display in 9 different languages
Dimensions : Height : 420 mm
Width : 290 mm
Length : 530 mm
Weight : 35 kg
Operating voltage : Switcheable between 230 V A.C/ 50 Hz or 115 V A.C/ 60 Hz
Maximum 1.5 A (at 230 V) / 3 A (at 115 V)
power input :
Circuit protection : T 4 A (at 230 V) / T 6.3 A (at 115 V)
Compressed Operating pressure : 5 bar
air supply : Air connector : Push-in fitting for a 8 mm tube
Filter : 5 µm
Environment : Operation at 10° to 35°C at a humidity of 30 to 85%
Transport at -25° to +70°C at a max. humidity of 95%
non-condensing
Storage at 5° to 40°C at a humidity of 5 bis 85%
Tolerance of the print : +/- 0.3 at a print speed of 66 mm/s and 100 m media roll
increasing with the size of the media roll
Tolerance measure : 0.6 mm at a print speed of 66 mm/s and 100 m media roll
0.8 mm at a print speed of 66 mm/s and 150 m media roll
1.0 mm at a print speed of 66 mm/s and 180 m media roll
Measures determinded with material of the manufacturer according to the
conditions of the manufacturer.
Demand mechanism : "Shuttle"
Patent-No. : 5,300,160
Patent date : Apr. 5, 1994
Peel-off table dim. : Length : 120 mm
Width : 20 mm