2N Lift8 v1.0 - Manual (Page 64)

64
2N TELEKOMUNIKACE a.s., www.2n.cz
®
085
Memory 5 for
fault reporting
max. 16
numerals 0 - 9
empty
086
Memory 6 for
fault reporting
max. 16
numerals 0 - 9
empty
087
Insertion of
specific
character in
memory for
fault reporting
088
Number of
cycles of
automatic
dialling for
check call
0 - 9 3
181-186
Type of
confirmation
for memory
1-6 fault
announcement
1 - 2 1
1 = With confirmation
DTMF (1),confirmation of
picking up (supported only
for GSM/UMTS), 3 = CPC,
4 = P100, 5 =
autodetection DTMF
protocol (CPC/P100)
If there is no guarantee of
problem-free transfer of
DTMF, do not set 5 for
autodetection CPC/P100,
but preferably give the
precisely used protocol
(3,4)
909
Time for
detection of
tone after
hanging up
1000 – 9999 ms 5000 ms
L8 waits for constant or
dialling tone If it is not
ascertained, there is a
fault on the line.
911
Number of
rings until the
incoming call is
picked up
1 - 9 2
Designates the moment of
picking up the line during
ringing (if there is an
incoming call).
912
Max. period of
call
0 – 1000 s 120 s
The call can be extended
by a command for
extension of the call (par.
924). 0=switched off
(never-ending call)