Actual programming, Error during programming – 2N Lift8 v1.0 User Manual

Page 58

Actual programming

As soon as you have entered the programming mode, you can change any
programmable value or several values, and you can do so in any order. The procedure
is simple - first the number of the function is entered, then its value. An asterisk serves
as a separator or “enter”. So in general terms the function has the following format:

number of function

value

The number of the function has three digits (see table). After entering this number and
the asterisk,

announces the number of this parameter, its current value and

possible range. After entering the value and the second asterisk,

announces “The

new value has been saved” or “Invalid value, the new value has not been saved” if the
value falls outside the permitted range.

For control purposes

reads out the number of the parameter and the newly

configured value.

Error during programming

If you make an error when entering the number (either for the number of the function
or the value), and you realise this before you press the asterisk, you can cancel the

entire number by pressing the

symbol and enter it again:

rejects the selected number of the parameter or specified value, it is

possible to continue programming – the number of the function must be entered
again even only the value was incorrect.
If you program a value other than the one you wanted, and the value is saved,
you can naturally enter the correct number again.

Note

The factory setting of the password is 12345, and we recommend that you
enter a different password so that your equipment is protected from other
people.
When entering a password you have a limit of 60 seconds (or limit
configured by you of 10 to 1000 seconds) for each character, otherwise

hangs up.

Warning

Some telephones have the undesirable property of going “deaf” for a
fraction of a second after pressing of the button (i.e., after the sending of
the DTMF signal). In such a case you will not here the entire text and it is
appropriate to use another telephone.