JLG 1500SJ Service Manual User Manual

Page 556

SECTION 6 - JLG CONTROL SYSTEM

6-104

– JLG Lift –

3121262

33. Operate the Lift Up function switch. The control sys-

tem will stop the boom at the desired angle. The dis-
play will read:

34. Operate the Telescope Out function switch. The con-

trol system will stop the boom at the desired length.
The display will read:

35. Operate the Jib Telescope Out function to the

mechanical stop. Press ENTER. The display will
read:

36. When the control system completes the calibration

step the display will read: