JLG 1500SJ Service Manual - Manual (Page 538)

SECTION 6 - JLG CONTROL SYSTEM
6-86 – JLG Lift – 3121262
26. Hitting the ENTER key at this point will take the oper-
ator to the next jib sensor calibration. The screen will
show:
27. Press Enter. The screen shown below will be dis-
played. At this point, use the platform rotate right
function switch to swing the jib right.
28. When the jib reaches the mechanical stop, press
ENTER. The screen will show:
29. When the system is complete with this step, the
screen below will be displayed.