Eppendorf BioSpectrometer fluorescence - Manual (Page 57)

57
Methods
Eppendorf BioSpectrometer ® fluorescence
English (EN)
Select data packets
Based on the method and parameter setting, only the available data packets are presented.
6.5.8 Finish the series of measurements
After the print & export method step has been finished, you can start a new series of measurements using
the selected method or select a new method.
Finish the series of measurements and start a new series of measurements
Finish the series of measurements and select a new method
• [Finish] softkey: Close the series of measurements and call up the method selection.
Results Primary result data; cannot be selected because they are always transferred.
Data Additional results data that are displayed during the measurement using the
[Data] softkey.
Graph Absorbance-wavelength-spectrum.
Graph data The basic numeric data for the graph.
"export only": Only available for export, i.e., not for printing.
Parameters Method parameters
Standards/results Results data of the standard evaluation.
Standards/graph (Only for standard evaluations with several standards:) absorbance
concentration graph.
• [Next >] softkey: Call up new series method step
• [New] softkey: Call up measure samples method
step and start a new series of measurements.