Eppendorf BioSpectrometer fluorescence User Manual
Page 44
Methods
Eppendorf BioSpectrometer
®
fluorescence
English (EN)
44
Enter dilution
Softkeys
• [Clear dil.]: Delete values for sample dilution.
• [OK]: Confirm sample dilution and return to sample measurement.
• [Cancel]: Cancel entry and return to sample measurement.
The dilution is used for all following sample results until it is changed by a new entry.
Enter sample ID
The ID will be applied to the following sample result. When an ID is being entered the last entered ID will
be displayed as a default template to allow the quick entry of IDs with a consecutive structure. A single ID
can only be assigned once for the same measuring series.
Additional data
• Upper right; first row:
Sample number: Counted sequentially and reset to "1" for each new series of measurements.
Sample dilution (if provided)
• Upper right; second row:
Sample identification (
ID) (if provided)
• Top left:
File name with which the data in the
print and export method step can be exported as Excel file (see
Softkeys
• [Dilution]: Enter sample dilution.
• [Edit ID]: Enter sample ID
• [Data]: Display additional result data (not available with all methods).
• [Finish]: End series of measurements and return to method selection.
The displayed absorbance values always correspond to the directly measured values. The
dilution or cuvette factor as well as background absorbances will be incorporated for the
following result calculation (see Absorbance values on p. 87).
The [Dilution] softkey is activated after the blank
(
blank key) has been measured.
1. Press the [Dilution] softkey.
2. Enter the volumes for the sample (up to 3 digits)
and for the dilution buffer (up to 4 digits).
The device will multiply the following sample results
by the calculated dilution factor.