Gateway E-9220T - Manual (Page 68)

63 www.gateway.com
Replacing the system board
9
Pull the system board away from the case and carefully remove it, then place it in a
static-free bag on a stable work surface.
10
Insert the new system board into the case, aligning the holes in the board with the
threaded standoffs on the side of the case.
11
Secure the system board to the case with the seven (7) screws you removed previously.
12
Reinstall the memory by following the instructions in “Installing memory” on
page 45 .
13
Reinstall the processor and heatsink by following the instructions in “Replacing the
processor” on page 51 .
14
Connect the power and data cables.
15
Reinstall the expansion cards by following the instructions in “Installing PCI
expansion cards” on page 47 .
16
Follow the instructions in “Closing the server case” on page 37 .