Gateway E-9220T - Manual (Page 29)

24 www.gateway.com
Chapter 3: Maintaining Your Server
4
When you are asked if you want the “DHCP Enabled – Y/N,” enter the response that
is appropriate to your situation.
If you enter No , then enter:
■ A Static IP Address for the AMT interface (Example: 10.225.200.101)
■ The Subnet Mask (Example: 255.255.255.0)
■ The Default Gateway (Example: 10.225.200.1)
■ The Preferred DNS Server (Example: 10.225.200.254)
■ The Alternate DNS Server (Example: 10.225.200.253)
■ The Domain Name (Example: irveng.local)
5
Press E SC to exit, then select Yes to confirm.
6
From another computer on your local network, open your Web browser.
7
Type the IP Address of AMT Interface (the IP address you entered in Step 4 , plus port
16992. (For example: http://10.225.200.101:16992). A login prompt will appear.
8
Enter the following at the login prompt:
■ Default Username – admin
■ Default Password – admin
You are now logged in to the AMT Interface on your server and the following screen
opens.