Gateway Memory Card Reader - Manual

Using Smart Copy
Your memory card reader includes a Copy button that makes it easy to copy pictures, movies, and data files from a memory card to
your computer.
To use Smart Copy:
1 Insert the memory card into the appropriate slot in the memory card reader.
2 Press and hold the Copy button until the Smart Copy dialog box opens and your computer starts copying the files. It may take
a few seconds for the Smart Copy dialog box to open.
3 Release the Copy button.
By default, if you are copying picture files, Smart Copy creates a folder using the date the pictures were taken as its name and
places it in the Pictures\SmartCopy folder on your computer’s hard drive. Smart Copy then copies the picture files into that folder.
Also by default, if you are copying other types of files, Smart Copy copies them into the Pictures\SmartCopy folder on your
computer’s hard drive.
4 When the Smart Copy dialog box closes, remove the memory card.
© 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and
product names are trademarks or registered trademarks of their respective companies.
Important
During this copy process, no files are deleted from the memory card.
If a file name already exists in the folder, the new file will have a number added to the file name. The first number will be 1 and the next number will
be 2 and so on.
Copy button
MAN GERSH3 MCR COPY BTN UPD R0 5/08