Gateway E-9220T - Manual (Page 65)

60 www.gateway.com
Chapter 4: Installing Components
9
Make sure that the positive (+) side of the new battery is facing correctly, then press
the new battery into the socket until it snaps into place.
10
Follow the instructions in “Closing the server case” on page 37 .
11
Turn on the server.
12
Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility
opens.
13
Restore any BIOS settings that you wrote down in Step 3 .
14
Save all your settings and close the BIOS Setup utility.