Gateway E-9220T - Manual (Page 41)

36 www.gateway.com
Chapter 4: Installing Components
Installing the bezel assembly
To install the bezel assembly:
1
Engage the tabs on the left side of the bezel with the slots in the left side of the
computer.
2
Swing the right side of the bezel in to engage the tabs on the right side of the bezel
with the slots on the right side of the computer.
3
Press the right side of the bezel firmly until it snaps into place.
Important
If you have installed any new drives in the external drive bays, make
sure to remove the corresponding filler panels in the bezel before
installing it.