Gateway E-9220T User Manual
Page 25
20
www.gateway.com
Chapter 3: Maintaining Your Server
3
Select the password to set according to the following table.
4
Type the password and press E
NTER
, then type it again and press E
NTER
.
5
Save your changes and exit the BIOS Setup utility.
Option
Description
Supervisor password
To control access to system configuration, set a supervisor password.
Using a supervisor password lets you make changes to any setting
in the BIOS.
Passwords can be cleared. To clear the passwords, see
.
User password
The supervisor password must be set up before a user password can
be set. To control access to the server, set a user password. The
supervisor can set the level of access granted to the user password.
The user password access levels are:
■
No Access. User cannot access the BIOS Setup utility.
■
Limited. User can change only the date and time.
■
View Only. User can see all settings, but cannot change them.
■
Full. User can change every setting except the supervisor password.
Passwords can be cleared. To clear the passwords, see
.