Gateway E-9220T - Manual (Page 27)

22 www.gateway.com
Chapter 3: Maintaining Your Server
Booting from the SUP CD:
1
Restart your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
2
Select the Boot menu, then press E NTER . The Boot menu opens.
3
Select the CD drive on the Boot menu, then press E NTER . The server will now boot
to the CD drive. If the CD drive is not detected, see “CD or DVD drive” on page 79 .
4
Insert the bootable CD into the CD drive.
5
Exit the BIOS Setup utility and let the server continue to boot.
6
After the updates are completed, restart your server, then press F2 when the Gateway
logo screen appears during startup. The BIOS Setup utility opens.
7
Use the down arrow key to select the Boot menu, then press E NTER . The Boot menu
opens.
8
Select your normal boot drive from the list, then press E NTER . The server will now
boot normally.