Gateway E-9220T - Manual (Page 103)

98 www.gateway.com
Appendix B:
Max CPUID Value Limit Disable
Enable
Display Setup Prompt On
Off
Peripheral
Configuration
Serial Port Disable
Enable
On-board LAN Disable
Enable
ASF 2.0 Disable
Enable
TPM 1.2 Disable
Enable
Drive Configuration
Use Automatic Mode Disabled
Enabled
ATA/IDE Mode Legacy
Enhanced
Configure SATA as IDE
RAID
S.M.A.R.T. Disable
Enable
SATA Port 0 Value
SATA Port 1 Value
SATA Port 2 Value
SATA Port 3 Value
Primary Master Value
Primary Slave Value
Hard Disk Pre-Delay Value (Default = 0)
BIOS menu BIOS submenu Setting Value