Packing and shipping the machine – Brother IntelliFAX 1360 User Manual
Page 91
Troubleshooting and Routine Maintenance
83
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty.
CAUTION
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a
Open the ink cartridge cover.
b
Pull the lock release lever down and
take out the ink cartridge. (See
Replacing the ink cartridge on page 76.)
c
Install the yellow protective part, lift the
lock release lever and push it until it
clicks, and then close the ink cartridge
cover.
CAUTION
If you are not able to find the yellow
protective part, DO not remove the ink
cartridge before shipping. It is essential that
the machine be shipped with either the
yellow protective part or the ink cartridge in
position. Shipping without them will cause
damage to your machine and may void your
warranty. Please keep the mashine upright.
d
Unplug the machine from the telephone
wall socket and take the telephone line
cord out of the machine.
e
Unplug the machine from the electrical
socket.
f
Unplug the interface cable from the
machine, if it is connected.
g
If your machine has a handset, remove
it and the handset curled cord.
h
Wrap the machine in the bag and put it
in the original carton with the original
packing material.