beautypg.com

3 general setup, Power save mode, Putting your machine in power save mode – Brother IntelliFAX 1360 User Manual

Page 20: Bringing your machine out of power save mode, Power save setting, General setup

background image

12

3

Power Save mode

3

When the machine is idle, you can put the
machine into Power Save mode by pressing
the Power Save key. You can still receive
telephone calls in Power Save mode. For
further information on receiving faxes in the
power save condition, please see the table on
page 12. If you want to do other operations,
you must take the machine out of Power Save
mode.

Note

• When the machine is Power Save Mode

all lights will extinguish.

• You can retrieve faxes using Remote

Retrieval if you are away from your
machine. (See Retrieving fax
messages on page 43)
.

• If you have connected an external

telephone or TAD, it is always available.

Putting your machine in
Power Save mode

3

a

Press and hold down the Power Save
key until the LCD shows
Shutting Down

.

The LCD light goes off.

Bringing your machine out of
Power Save mode

3

a

Press the Power Save key.

Note

• Even if you have put the machine into

Power Save mode, it will periodically clean
the print head to preserve print quality.

• If you unplug the AC power cord, no

machine operations will be available.

• You can customize Power Save mode so

that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 12.)

Power Save setting

3

You can customize the machine's
Power Save key. The default mode is
Fax Receive:On

. Your machine can

receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off. (See
Power Save mode on page 12)

a

Press Menu, 1, 4.

b

Press a or b to choose
Fax Receive:On

, or

Fax Receive:Off

.

Press OK.

c

Press Stop/Exit.

1

You cannot receive a fax with

Start.

2

You can receive telephone calls by lifting the
handset.

3

Should be set before you switch off the machine.

General setup

3

On/Off
setting

Receive
mode

Available operations

Fax

Receive

:On

1 2

(factory
setting)

Fax Only

Fax/Tel

External

TAD

Fax Receive
Fax Detect

Delayed Fax

3

Fax Forward

3

Fax Storage

3

Remote Retrieval

3

Manual

Fax Detect, Delayed

Fax

3

Fax

Receive

:Off

No machine operations
will be available other
than cleaning the print
head.