Brother IntelliFAX 1360 - Manual (Page 29)

Sending a fax
21
5
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Start to send the
portion that is in the memory.
Cancelling a Broadcast in
progress
5
a
Press Menu, 2, 6.
The LCD will show the fax number being
dialled.
b
Press OK.
The LCD will show the job number:
XXXXXXXXX
1.Clear 2.Exit
c
Press 1 to clear.
The LCD will then show the Broadcast
job number and 1.Clear
2.Exit .
d
To cancel the Broadcast, press 1.
e
Press Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings
5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, overseas mode and real time
transmission.
a
Make sure you are in Fax mode .
b
Load your document.
c
Choose a setting you want to change.
Press OK.
d
Choose one of the options below:
Next
1.Yes 2.No
Press 1 to change another setting.
Press 2 when you have finished
choosing your settings.
e
Send the fax as usual.
Contrast
5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the default setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a
Make sure you are in Fax mode .
b
Load your document.
c
Press Menu, 2, 2, 1.