Brother IntelliFAX 1360 - Manual (Page 84)

76
Routine maintenance
B
Replacing the ink cartridge
B
Your machine is equipped with an ink sensor.
The ink dot counter automatically monitors
the level of ink in the cartridge. When the
machine detects an ink cartridge is running
out of ink, the machine will tell you with
message on the LCD.
Be sure to follow the LCD prompts to replace
the ink cartridge in the correct order.
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from entering the print
head assembly.
a
Open the ink cartridge cover.
If the ink cartridge is empty, the LCD
shows Ink Empty Black and
Replace Ink
.
b
Pull the lock release lever down and
take out the ink cartridge.
c
Open the new ink cartridge bag, and
then take out the ink cartridge.
d
Remove the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
1