Brother IntelliFAX 1360 - Manual (Page 22)

Chapter 3
14
Volume Settings
3
Ring Volume
3
You can choose a range of ring volume
levels, from High to Off.
While in Fax mode , press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
3
a
Press Menu, 1, 3, 1.
b
Press a or b to choose Low, Med,
High
or Off.
Press OK.
c
Press Stop/Exit.
Beeper Volume
3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu, 1, 3, 2.
b
Press a or b to choose Low, Med,
High
or Off
Press OK.
c
Press Stop/Exit.
Speaker Volume
3
You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu, 1, 3, 3.
b
Press a or b to choose Low, Med,
High
or Off.
Press OK.
c
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press d or c .
This setting will stay until you change it
again.
c
Press Hook.