Using receive modes, Fax only, Fax/tel – Brother IntelliFAX 1360 User Manual
Page 35: Manual, External tad, Fax only fax/tel manual external tad
Receiving a Fax
27
6
Using receive modes
6
Some receive modes answer faxes
automatically (Fax Only and Fax/Tel).
You may want to change the ring delay before
using these modes. See Ring
Delay on page 28.
Fax only
6
The Fax Only mode will automatically
answer every call as a fax call. If the call is a
fax your machine will receive it.
Fax/Tel
6
The Fax/Tel mode helps you automatically
manage incoming calls, by recognising
whether they are fax or voice calls and
dealing with them in one of the following
ways:
Faxes will be automatically received.
Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.
Use this mode if you receive few voice
calls.
Also see F/T Ring Time (Fax/Tel mode only)
and Ring Delay on page 28.
Manual
6
To receive a fax in manual mode press Start
when you hear fax tones (short repeating
beeps). You can also use the Fax Detect
feature to receive faxes by lifting a handset on
the same line as the machine.
Also see Fax Detect on page 29.
External TAD
6
The External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:
Faxes will be automatically received.
Voice callers can record a message on the
external TAD.
For more information see Connecting an
external TAD (telephone answering
device) on page 34.