Toshiba Magnia Z300 - Manual (Page 98)

Installing and Removing Hardware
Memory module 76
6 Insert the memory module into the proper memory slot, paying
attention to the position of each notch on the memory module.
Insert the memory module until it is locked by the hooks on
both sides.
Installing a memory module
7 Install the power supply unit.
See “Power Supply Unit” on page 69
8 Attach the server panels and outer covers.
9 Connect the power cable of the server to the power supply and
switch on the server.
NOTE: Don't hold a memory module by its connecting termi-
nal. If the connecting terminal are touched by hand, it may
cause the memory module to have poor contacts.
Be careful not to insert an extension memory module with an
incorrect orientation. Improper installation of a memory mod-
ule may cause damage to the memory module or the mem-
ory slot.