Toshiba Magnia Z300 - Manual (Page 208)

Installing Software
NetWare 186
Select “Modify,” and replace the driver according to the following
procedure:
1 Move the cursor to “Storage adapters” on the menu shown
above with the arrow keys, and press the key.
2 As the following menu appears, delete “ADPT160M” with the
key
3 Set the floppy disk labeled “MegaRAID Drivers & Utilities for
Series 475/493 NetWare/MS-DOS” (supplied with RAID
Controller) in the floppy disk drive.
4 Press the key to select “Add an unlisted driver .”
The following drivers were detected for this server.
Add, change,or delete device drivers as needed.
Device types Driver names
Platform Support Module: MPS14
HotPlug Support Module: (optional)
Storage adapters ADPT160M,
IDEATA
options
_Continue
_Modify
Add, edit, or delete storage drivers. Each control-
ler/adapter requires a driver.
Driver name Device name Stat
||ADPT160M.HAM|| Adaptec Ultra160 ASPI & SCSI Module||
||IDETA.HAM || Generic ATA/IDE/ATAPI.Adapter ||
Additional Driver Options
_Return to driver summary
_Modify