Toshiba Magnia Z300 - Manual (Page 235)

Troubleshooting
Trouble with Application Software
213
See the operating manual of Harness Eye / web
See the operating manual of respective device.
The power button does not function after abortion
If, after abortion of the system, it cannot be started by pressing the
power button, unplug the power cable once and then supply the
power to the server again.
The internal clock does not keep precise time
Generally, a slight error occurs in clock precision. If the clock is
not adjusted for a long time, this error builds up, and may increase
to the point that system operation is adversely affected. To prevent
this, periodically adjust the system time.
See “System Configuration Setup” on page 140.
See the operating manual of respective OS.
Trouble with Application Software
If any trouble occurs in the application software, check the
following.
1 Are the hardware requirements of the server appropriate for the
software?
See the software operating manual.
2 Is the software a certified copy or the master?
Illegally copied software may not operate.
See the software operating manual.
3 Was the software copied from floppy disk or CD-ROM?
If so, make sure that the software operates properly on a differ-
ent system.
4 If the software has been loaded from Hard Disk Drive (HDD),
check that the software is installed properly.