Selecting the onboard network adapter driver – Toshiba Magnia Z300 User Manual
Page 209
Installing Software
NetWare
187
5 Press the
as follows.
A: \NetWare\NW5
As the driver is detected, it is added to the “List of drivers currently
selected,” as shown below.
Proceed with installation operation following the instructions that
appear on the screen.
Selecting the Onboard Network Adapter driver
When the installer detects the network adapter, the following
screen appears.
Select “Modify” to replace the driver.
1 Move the cursor to “Network boards” on the screen shown
above with the arrow keys, and press the
2 When the “List of network drivers currently selected” appears,
delete the drivers with the key.
3 Insert the Intel LAN driver for NetWare created with Toshiba
Server Setup Tool in the floppy disk drive.
|| MEGA4_XX.HAM || AMI MegaRAID Enterprise 160 1700/
Express500 Adap ||
The following drivers were detected for this
server. Add, change,or delete device drivers as
needed.
Device types
Driver names
Storage Devices:
IDEATA, IDECD
Network boards:
CE100B,CE100B
NetWare loadable modules
(optional)
options
_Continue
_Modify