Floppy disk drive – Toshiba Magnia Z300 User Manual

Page 51

Getting Started

Connecting peripheral devices

NOTE: When connecting and disconnecting an interface
cable, be sure to hold the cable connector.

Some articles and interface cables of other brands cannot be
connected to this server as external units and connecting
cables. Before purchasing a peripheral unit, ask the manufac-
turer or sales office of the article about its compatibility to this
server. When connecting peripheral units, see to instructions
of respective units together with this manual.

Floppy disk drive

The floppy disk drive (FDD) supports two floppy-disk formats:
3.5“ 2HD (1.44 MB) and 3.5” 2DD (720 KB).

NOTE: The FDD indicator is lit while data is being read or
written. When it is lit, do not turn off the server, nor press the
eject button, nor reset the server. Otherwise, data recorded
on the floppy disk might be lost or corrupted.

After using the floppy disk drive, always remove the floppy
disk from it.