1 are all cables firmly and properly connected, Windows nt/2000 is locked or cannot be used, Function software and other software – Toshiba Magnia Z300 User Manual

Page 234

Troubleshooting
Troubleshooting

212

See the operating manual of the expansion card.

See the operating manual of the peripheral devices.

1 Are all cables firmly and properly connected?

Check only the cables within the scope described in this man-
ual, and instruction manuals for expansion cards and periph-
eral devices.

2 Is a floppy disk inserted in the floppy disk drive?

3 Are the jumper switches and other switches set properly on

expansion cards and peripheral devices?

4 Are expansion cards and Hard Disk Drive (HDD) properly

connected?

5 Is the Hard Disk Drive (HDD) properly formatted and set up if

added?

6 Is the correct version of each device driver installed?

7 Is the server selected if the switch box is used on a Rack Type?

Windows NT/2000 is locked or cannot be used

Check the previous items to see if those items apply. If an item
applies, carry out the remedy for that item. If none of the items
apply, reboot the server. If Windows NT/2000 can be used after
rebooting the server, see “Remedy When Windows NT/2000 is
Usable” on page 214.

If Windows NT/2000 cannot be used, see “Remedy When Win-
dows NT/2000 is Unusable” on page 215.

Trouble information or error log still remains in the server
monitor function software and other software