Toshiba Magnia Z300 - Manual (Page 172)

System Configuration Setup
BIOS setup utility 150
Security menu
This section describes the security settings available in the BIOS
Setup Utility.
c Set Supervisor Password
Allows Supervisor Password to be registered, changed, and/or
deleted. To delete a password, press with “New Pass-
word”. You are prompted to enter the password when the
BIOS setup utility or OS is started up.
c Set User Password
Allows User Password to be registered, changed, and/or
deleted. This can be set only when the supervisor password is
set. You are prompted to enter the password when the BIOS
setup utility or OS is started up.
NOTE: For security reasons, the passwords do not appear on
the screen. If you forget the passwords, shut down the server
and clear the CMOS.
See Appendix C “Switch Setting” on page 234
c Diskette Access :[User]
Do not change this setting.
c
Password on Boot :[Disabled]
Specifies whether or not a password input request message is
to be displayed when starting the operating system.
Supervisor Password is: Clear
User Password is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Diskette Access: [User]
Password on Boot: [Disabled]